Phone: 0427 046 064 or 0439 320 905 Mon-Fri 9am-5:30pm Australian Eastern Standard Time.

 

Ozroll E-Series E-3Way Switch (used where more than 1 x shutter is controlled eg a Bay Window)

This Item is shipped direct from Ozroll via Express Post.

Flat rate postage & handling charge of $15.00 per order.

AU$72.00
(Including tax)
You may wish to purchase a 2.5m wiring loom with spade terminals attached ready for use.
OZROLL
RSE3WAY
+

Miller Canvas is an authorised Ozroll Distributor for genuine Ozroll E-Series E3Way Switch.

 

CONSISTS OF:

1 x E-Series E3Way Switch

1 x Small (450mm) wiring harness (loom) with instructions to connect the 3-way switch to the E-Port Controller.

The E3Way switch if fixed just below, above or to the side of the E-Port Controller

(You may need to purchase an EXTENSION wiring loom 2.5m as an option if you are retrofitting a 3 way switch and need to extend a wiring harness from an existing motor PLEASE NOTE: the original wiring harness is 2.5 m long from the motor but may have been cut shorter by the original installer)

Allows for three (3) shutters to be operated by a single controller.

Ideal for Bay or Box Windows.

The E-3Way switch allows three Ozroll Drive Systems to be operated separately by only one E-Port. Acting as a circuit breaker, the E-3Way receives the power delivered from the controller and relays it to one of three shutters selected at the time by the operator.
This makes it a convenient and cost-effective option for operating multiple shutters within close proximity, such as bay or box windows.
Generally, for the most user-friendly operation, designate shutters 1-3 from left to right.
For example:
1 = left window
2 = middle window
3 = right window

When you press the number related to the desired shutter an LED will light to indicate the selection has been made and you can then use the E-Port to operate that shutter. This selection will remain valid for 60 seconds, at which point the E-3Way will revert back to the default shutter.
The default shutter can be selected by pressing and holding the preferred number for 5 
seconds until the correlating LED flashes.

It has a simple and effective wiring process, with electronic switching that can determine the 'default' shutter.

IMPORTANT:

If converting from an ODS Control10 or Smart Control10 (which have the 3-way toggle switch that piggy-backs onto the back of the controller) you will need:

1 x E-Port Conversion kit.

1 x E-Port Controller.

1 x Charger.

1 x E-3Way Switch. THE 3WAY SWITCH MOUNTS JUST BELOW, ABOVE or to the SIDE of THE E-PORT CONTROLLER.

 

A customer photo of an E-3Way Switch conversion completed by a lady in her 60's.

A 450mm wiring loom is supplied with the E-3Way switch to enable connecting the switch unit to the back of the controller.

A customer photo of an E-3Way Switch conversion completed by a lady in her 60's.

 

OR YOU MAY CHOOSE TO MOUNT SIDE by SIDE IF THE THAT SUITS

A 450mm wiring loom is supplied with the E-3Way switch to enable connecting the switch unit to the back of the controller.

Over 5 years since its inception, the E-3Way has been well received as a cost-effective and attractive option for operating multiple Roller Shutters within close proximity. What many do not realise is, the E-3Way incorporates a small watch battery which it utilises for its electronic switching. In recent times, some of the original units dispatched are beginning to run out of battery life. Replacing the batteries is a very simple process and replacement batteries are available at most local shopping centres. We strongly recommend taking this avenue prior to exchanging the entire unit.

Express Post to anywhere in Australia.

SHIPPING

All Ozroll products are shipped via Express Post.

  • A flat rate $15.00 Postage charge (per order wether for 1 item or several items) is added at the cart.
  • Posted direct from the Ozroll Factory/Warehouse in Adelaide.
  • Within 48 hours of receiving your completed payment.
  • You will be notified via email once shipped.

 

WARRANTY and RETURNS

Miller Canvas is committed to providing quality products to our customers. If for any reason you are not completely satisfied with any product supplied by us, please contact us by emailing sales@millercanvas.com.au within 7 days of receiving the goods.

You must:

  • Include your Name, Address and Tax Invoice number in the email.
  • Provide a clear and detailed description of the problem you are experiencing. 
  • No product is to be returned without authorisation and an accompanying CUSTOMER CLAIM FORM issued by Miller Canvas.
  • Any return will be to Ozroll and not Miller Canvas unless otherwise directed.
  • Return packaging must be of sufficient quality to protect the goods in transit.
  • You are responsible for ANY return costs of the goods back to Ozroll.
  • Different products have varying warranty periods generally stated on the product description page.
  • Upon return Ozroll technicians will inspect and test the component and will repair or replace the item and ship it back to you.
  • Guarantees do not apply if you got what you asked for but simply changed your mind, found it cheaper somewhere else, decided you did not like the purchase or had no use for it.

In addition to manufacturers’ guarantees on selected products, Miller Canvas and its suppliers provide a guarantee of acceptable quality on every product, by law. You are entitled to a replacement or refund for a major failure, and to compensation for other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality but the failure does not amount to a major failure. This refund policy is not intended to exclude or limit any rights which you may have under the Competition and Consumer Act 2010 (Cth) or equivalent State or Territory laws.

RELATED PRODUCTS

Heavy Duty Canvas Seat Cover to fit HONDA TRX420FM FOURTRAX ATV Someone in BUCHANAN / KATHERINE bought a TRX420FM FOURTRAX HONDA ATV 2007 - 2013 Heavy Duty Canvas Seat Cover 1 days ago.